For Immediate Release
Up to 72W 4:1 Input
16th Brick DC-DC Converters
Londonderry, NH – October 10, 2018 – Semiconductor Circuits, Inc. expands the power rating of the “Cool Power Technologies” wide input range 16th brick DC-DC converter series. These open frame (through-hole or SMT) or baseplated modules provide up to 72W of output power @ output voltages of 5.0, and 12Vdc – ideal for distributed power architecture applications or as a fully regulated intermediate bus converter. These modules are compliant with DOSA 16th brick footprint and interface standards. The converters have a wide input voltage range of 18 to 72 VDC (9-36 Vin upon request) & provide 2250 VDC input to output isolation.
The CPT 4:1 series offers output voltages from 3.3V to 48V and input voltage ranges of 9-36Vin or 18-72Vin. Other power levels and output voltages in the 4:1 input series are available upon request. We also welcome quick-turn modifications and custom configurations to meet our customer’s particular requirements.
The CPT 4:1 input series meets EN 60950 basic insulation requirements and is RoHS III Directive 2015/863/EU and REACH 1907/2006 – 205 SVHC compliant. The module complies with all of the typical industry requirements including no load operation, 2X nominal input voltage transient and pre-biased load startup.
Other features include: fixed-frequency operation, auto-restart OVP, OCP & OTP protections, UVLO, remote sense and +/-10% output voltage trim using industry standard equations. Remote ON/OFF is standard with positive or negative logic options available.
The modules feature a standard 16th brick pinout with dimensions of 1.3” L x 0.9” W (33.02mm x 22.86mm.) They have a maximum height of 0.374″ (9.5mm) which accommodates tight card spacing with minimal airflow blockage of downstream components. Baseplate modules offer a standard 0.500″ inch max. height [12.7mm] for interfacing with heat spreader/chassis surfaces.
A product brief and technical datasheets are available at www.dcdc.com & sample quantities can be ordered directly from stock via the website. Please contact sales@dcdc.com or call 603-893-2330 for OEM pricing and availability.
Semiconductor Circuits, Inc. has been designing and manufacturing AC/DC & DC-DC modules for over 45 years (founded in 1966.) Module applications include: industrial, test, telecom/communications, networking, data-processing, railway, military, medical and aerospace. Please visit our website at www.dcdc.com for more information.
Semiconductor Circuits, Inc., 14 Tinker Avenue Unit#1 Londonderry NH 03053. 603-893-2330 or sales@dcdc.com
Londonderry, NH – January 23, 2018 – Semiconductor Circuits, Inc. introduces the new “Cool Power Technologies” Compact Chassis Mount DC-DC converter series.
Londonderry, NH – September 14, 2017 – Semiconductor Circuits, Inc. introduces the CPE6D24, CPE6R24 and CPE5R48 “Cool Power Technologies” wide input range 8th brick DC-DC converters designed for use in power radio and other applications where it is intended to directly replace larger quarter bricks modules (identical pin out and functionality.) The converter features an industry standard 18-36Vdc or 36-72Vdc (24 or 48Vdc nominal) input voltage ranges and have outputs trimmable from 21-34Vdc (model dependent – see datasheet.) The modules have a typical full load efficiency of 93% which allows for use over a wide ambient temperature range with minimal derating. The open frame design is also available with an optional baseplate for those applications where conduction cooling is required or preferred. This module is compliant with DOSA footprint and interface standards.
Londonderry, NH – June 21, 2017 – Semiconductor Circuits, Inc. introduces the new “Cool Power Technologies” 5V input (4.5-9V) 5V, 6A and 3.3V, 6A 30W 1×1 DC-DC converters. These open frame or optional encapsulated modules provide up to 30W of output power @ an output voltage of 3.3V or 5VDC (12V & 15V versions are also available – consult factory.) These modules are ideal for industrial or distributed power architecture applications. These module are compliant with the standard 1×1 & 1×2 pinout and interface standards. It has a wide input voltage range of 4.5 to 9 VDC (3-9 Vin for the 3.3V version) & provides 2250 VDC input to output isolation in open frame configuration, 1600VDC for the encapsulated module.
Londonderry, NH – March 6, 2017 – Semiconductor Circuits, Inc. introduces the new “Cool Power Technologies” Compact Chassis Mount DC-DC converter series.
Londonderry, NH – October 24, 2016 – Semiconductor Circuits, Inc. expands it’s new line of “Cool Power Technologies” ultra-wide input range 40W 1×1 DC-DC converters. Open frame or encapsulated 40W 1×1 modules are available in 5V @ 8A and 12V @ 3.3A versions. These modules are ideal for industrial, instrumentation, transportation, medical, solar and many other types of applications including distributed power architecture applications. The module is compliant with the standard 1×2 pinout footprint and interface standards. It has an ultra wide input voltage range of 9 – 36 VDC or 18 – 75 VDC & provides 2250 VDC input to output isolation in open frame configuration, 1600VDC in the encapsulated module.
Londonderry, NH – September 3, 2015 – Semiconductor Circuits, Inc. introduces the new “Cool Power Technologies” Chassis Mount DC-DC converter series.
Londonderry, NH – June 26, 2014 – Semiconductor Circuits, Inc. introduces the CPE9B36 “Cool Power Technologies” 12V, 9A wide input range 8th brick DC-DC converter. This open frame module provides a full 108W of 12V power @ 55C & 200lfm of airflow – ideal for bus converter or distributed power architecture applications. This module is compliant with DOSA footprint and interface standards. It has a wide input voltage range of 18 to 72VDC & provides 2250VDC input to output isolation.
